Surveying Accessories

Leica flat magnetic target mount, article 670229, for attaching a compatible surveying or scanning target to a flat steel surface.Features a 5/8-in...

The Leica TRI 120 is a compact tripod for compatible Leica DISTO instruments and tripod adapters.Twist-lock legs and 180° folding support a compact...

The Leica GAD31 adapter mounts a GNSS antenna with a 5/8-inch screw connection onto a survey pole or carrier with a Leica stub fitting.

The Leica CPR105 double-sided reflector has two back-to-back prisms, each with a 0 mm Leica prism constant. Its 1/4-inch fitting suits GLS105/GLS11...

The Leica GDF301 tribrach has no optical plummet and suits lightweight instruments used in normal environmental conditions. It weighs 800 g and has...

The Leica GVP703 padded soft bag carries survey accessories such as a field controller, radios or a compatible tablet.Leica part number: 790314.Che...

The Nedo 483521 bipod supports a prism pole with two telescopic legs. Push-button adjustment extends or retracts the legs to help hold the pole ver...

The MQ Statieven column stand supports a compatible laser or survey instrument where the floor must remain clear.Uses a strap-and-ratchet mounting ...

The Leica GVP621 is a padded soft bag for storing and transporting a compatible 360° prism, including the Leica GRZ4.Article 725512 is the bag only...

The Duracell Procell AAA Alkaline Battery is a non-rechargeable alkaline battery for equipment that specifies this cell size and voltage. Procell p...

The Duracell Procell AA Alkaline Battery is a non-rechargeable alkaline battery for equipment that specifies this cell size and voltage. Procell pa...

The Duracell Procell D Alkaline Battery is a non-rechargeable alkaline battery for equipment that specifies this cell size and voltage. Procell par...

The Duracell Procell 9v Alkaline Battery is a non-rechargeable alkaline battery for equipment that specifies this cell size and voltage. Procell pa...

A three-legged metal support for holding a levelling staff or ranging pole steady.Features a jaw clamp and adjustable ball-and-socket joint. Height...

The Nedo 210442 heavy-duty elevating tripod supports rotating lasers and suitable laser scanners. Its double telescopic column uses geared height a...

ChrisNik MAG survey nails provide a marked centre point for surveying and setting out.The hardened, magnetised nails have a corrosion-resistant zin...

Leica GRT146 GNSS CarrierThe Leica GRT146 is a simple GNSS carrier with a 5/8" screw for direct mounting of compatible GNSS antennas. It is designe...

The Leica GRT144 carrier mounts a reflector with a stub fitting in a tribrach that has an optical plummet. It provides 1.0 mm reflector centring ac...

The Leica GZW12 extends a surveying pole with a Leica stub fitting by 1.00 m. Check the pole connection before ordering; this extension uses a stub...

The Nedo 200631 compact aluminium tripod supports dot, line and rotating lasers at low working heights. Quick clamps adjust the legs, while the sli...

The Leica GVP735 mission bag carries and protects BLK2GO, BLK360 and BLK360 SE scanners and their accessories. A shoulder strap supports transport ...

The Leica GDF323 is a black tribrach without an optical plummet. For RTC360 scanner setups it is used with the GAD120 adapter, which provides the L...

The Leica GHT77 is a replacement tether for a compatible CS35 tablet stylus, helping keep the pen with the controller.

The grey Rothbucher Systeme RSAK130 angle plate carries two 30 × 30 mm reflective targets for observing structures from different positions. It is ...