Surveying Accessories

The Survipod Cast In Sleeve provides the mounting location for the Original Survipod instrument support. It is positioned and levelled in wet concr...

Survipod Boltfix Anchors are fixing anchors for the Boltfix instrument support system, for use in suitable concrete, brick and concrete block. M8 ×...

The Leica CLB is a rechargeable lithium-ion battery pack, article 864849, for Leica Rugby CLH and CLA-series lasers.It can be charged in the compat...

Leica replacement central locking screw and clamp set, article 876270, for the GST101 wooden tripod.Replaces the instrument securing assembly. Chec...

The Survipod Levelling Tamp is an aluminium tool for checking and maintaining concrete levels during placement. Its lightweight construction suppor...

The Leica GAD103 adapter mounts a GRZ101 mini reflector onto survey poles and carriers with a Leica stub fitting, excluding mini poles. It provides...

The Survipod Boltfix 90 is an instrument support designed to bolt to vertical steel or concrete surfaces for setting out and monitoring. 500 mm off...

The Leica GAD105 adapter mounts a GMP111 or GMP111-0 mini prism onto a survey pole or reflector carrier with a Leica stub fitting. It matches the h...

The Survipod Offset Boltfix is a bolt-mounted support for surveying instruments, with a 300 mm offset to provide clearance around vertical reinforc...

The Survipod Boltfix is a bolt-mounted instrument support for setting out and monitoring on suitable steel or concrete structures. Total stations a...

The Leica SPF05 set contains two display protection foils and a microfibre cleaning cloth for supported 5-inch WVGA displays. Compatible models inc...

The Offset Survipod is a sleeve-mounted instrument support for setting out on concrete structures. Its offset design provides clearance around vert...

The Leica SPF04 set contains two display protection foils and a microfibre cleaning cloth. It fits CS10/CS15 controllers and supported instruments ...

The Leica SPF01 display protection foils fit CS10 and CS15 field controllers. The set contains two foils and a microfibre cleaning cloth.Leica part...

The Leica GHT196 holder attaches a GHM007 instrument height meter to a Leica Geosystems tribrach. The height meter is a separate component.

The Original Survipod is an instrument support for site setting out. It sits in a cast-in sleeve installed in a column or wall, with the surveying ...

The Leica GHM007 instrument height meter uses a specially scaled tape to read the height to the centre of a total-station telescope or survey prism...

The Leica GVP642 is a hard container for a GS15 SmartAntenna and CS10 or CS15 field controller in compatible SmartPole and SmartStation arrangement...

The Leica GVP644 soft bag carries a CS15 field controller and helps keep it protected from dirt during transport. It includes a belt loop.Leica par...

The Leica GRT247 carrier provides a 5/8-inch threaded connection for mounting a compatible GNSS receiver in a tribrach with an optical plummet. Its...

The Leica CTP104 is a medium-duty aluminium tripod with fast leg clamps and a carrying strap.Its 5/8-inch instrument fixing screw supports compatib...

The Leica MS1 is a 1 GB industrial-grade USB memory stick with a metal housing, used to transfer data with compatible Leica total stations and digi...

The Leica GEV242 charger charges one GEB371 or GEB373 external lithium-ion battery. It provides a dedicated charging solution for these Leica exter...

The Leica GKL112 charger charges GEB111 and GEB121 nickel-metal hydride batteries.Leica part number: 734753.Includes a car adapter cable. Check the...